GUANGZHOU FUDE ELECTRONIC TECHNOLOGY CO.,LTD
GUANGZHOU FUDE ELECTRONIC TECHNOLOGY CO.,LTD
Add to Cart
The vibration and noise generated during operation are relatively low, making them suitable for use in quiet environments.
The NEMA 17 stepper motor is used for precise control of the position of the print head or laser head.
Features:
Step Angel | 1.8 ° |
Fram Size | 40 mm |
Number of Phase | 2 Phase |
Rated Current | 1.2 A |
Holding Torque | 450 mN.m |
Resistance | 3.1 ohm |
Inductance | 15 mH |
Rotor Inertia | 57 g-cm² |
Motor weight | 0.3 kg |
Number of leads | 4 |
Connection | Bipolar |
Step Angle: 1.8°
Maximum Temperature :80°C maximum
Ambient Temperature: -20 °C to 50°C
Storage Temperature -20: °C to 100°C
Humidity Range (%) :85% or less, non-condensing
Magnet Wire Insulation :Class B 130 deg C
Insulation Resistance :100M Ohm at 500 VDC
Dielectric Strength :500 VDC for 1 min
| Model | Holding Torque | Step Angle | Motor Length | Type of Shaft | Rated Current |
| 42SHD4950 | 0.13N.m | 1.8° | 20mm | D Shaft-20mm | 1.0A |
| 42SHD4003 | 0.26N.m | 1.8° | 34mm | D Shaft-20mm | 0.4A |
| 42SHD0261 | 0.45N.m | 1.8° | 40mm | D Shaft-20mm | 1.68A |
| 42SHD4425 | 0.59N.m | 1.8° | 48mm | D Shaft-24mm | 2.0A |
| 42SHD4813 | 0.8N.m | 1.8° | 60mm | D Shaft-24mm | 2.1A |
Download
Encoder | Brake | Gearbox | Shaft |
| | | |