GUANGZHOU FUDE ELECTRONIC TECHNOLOGY CO.,LTD
GUANGZHOU FUDE ELECTRONIC TECHNOLOGY CO.,LTD
Add to Cart
The ball screw has lower frictional resistance and higher efficiency, allowing the stepper motor to operate at higher speeds.
Ball guided structure can provide smooth motion and low friction loss.
Features:
| Step Angel
| 1.8 ° |
| Fram Size
| 42 mm |
| Number of Phase
| 2 Phase |
| Rated Current
| 1.68 Amp |
| Holding Torque
| 450 mN.m |
| Resistance
| 1.95 ohm |
| Inductance
| 4.4 mH |
| Rotor Inertia
| 57g-cm² |
| Motor weight
| 0.3 kg |
| Lead Screw
| Tr8X2 |
| Connection
| Bipolar |
Step Angle: 1.8°
Maximum Temperature :80°C maximum
Ambient Temperature: -20 °C to 50°C
Storage Temperature -20: °C to 100°C
Humidity Range (%) :85% or less, non-condensing
Magnet Wire Insulation :Class B 130 deg C
Insulation Resistance :100M Ohm at 500 VDC
Dielectric Strength :500 VDC for 1 min
Shaft Radial Play:0.02Max. (450g-load)
Shaft Axial Play:0.08Max. (450g-load)
Max. radial force:28N (20mm from the flange)
Max. axial force):10N
| Model | Holding Torque | Step Angle | Motor Length | Type of Shaft | Rated Current |
| 42SHD4950 | 0.13N.m | 1.8° | 20mm | D Shaft-20mm | 1.0A |
| 42SHD4003 | 0.26N.m | 1.8° | 34mm | D Shaft-20mm | 0.4A |
| 42SHD0261 | 0.45N.m | 1.8° | 40mm | D Shaft-20mm | 1.68A |
| 42SHD4425 | 0.59N.m | 1.8° | 48mm | D Shaft-24mm | 2.0A |
| 42SHD4813 | 0.8N.m | 1.8° | 60mm | D Shaft-24mm | 2.1A |
| Body Length | Diameter of Screw | Pitch | Length of Screw | ||
| 20 mm 34 mm 40 mm 48 mm 60 mm | 5 | 2 | 20-1000 mm | ||
| 8 | |||||
| 6.35 | 1.27 | ||||
| 3.175 | |||||
| 6.35 | |||||
| 6.5 | 3 | ||||
| 6.35 | |||||
| 8 | 1 | ||||
| 2 | |||||
| 4 | |||||
| 8 | |||||
| 12 | |||||
Download